How many engineer-hours does each quality incident cost you?
Quality dropped at 8,000 concurrent calls. Your team opens trace files, correlates SIP signaling with RTP streams in spreadsheets, and spends hours hunting the root cause. Was it codec negotiation? Packet loss on a specific trunk? A jitter spike in one direction? CallMeter correlates signaling and media automatically so you see the answer in seconds. Run tests from CallMeter cloud or deploy workers on your own infrastructure to diagnose from the same network path your customers use.
What CallMeter Delivers
Automatic Signaling-Media Correlation
SIP response codes, retransmits, and timing automatically correlated with per-SSRC RTP quality metrics across audio and video streams. No manual trace stitching.
Per-Call, Per-Second Granularity
Pinpoint which endpoint, which direction, and which second quality degraded. Exact measurements, not averages.
Continuous Probes for Early Detection
Set up lightweight probes that catch quality degradation before it becomes an incident. When probes detect drift, you investigate before customers notice.
Debug Quality Incidents in Minutes, Not Hours: A Deep Dive
The Problem
When voice or video quality drops under load, your team opens trace files, exports SIP logs, and correlates them with RTP streams in spreadsheets. Hours disappear before anyone identifies the root cause. Meanwhile, customers experience degraded calls.
How CallMeter Solves It
Run a load test from CallMeter cloud or your own infrastructure, reproduce the quality drop, and let CallMeter correlate SIP signaling patterns with per-SSRC quality metrics automatically. You see which endpoint, which direction, and which second quality degraded — with the probable root cause identified instantly.
What You Get
Per-call diagnostic reports with automatic root cause tagging. Continuous probes that catch issues before they become incidents. Exportable evidence for change management boards and vendor escalations.
How It Works, Step by Step
Configure
Point CallMeter at your SIP infrastructure and set call volume.
Reproduce
Run a load test that replicates the quality incident conditions.
Diagnose
View automatic signaling-media correlation showing root cause.
Export
Generate a diagnostic report for your team or vendors.
Before vs. After CallMeter
| Metric | Without CallMeter | With CallMeter |
|---|---|---|
| Time to root cause | 2-8 hours | Under 60 seconds |
| Diagnosis method | Manual trace correlation | Automatic signaling-media correlation |
| Evidence quality | Screenshots and guesses | Timestamped per-endpoint reports |
Key Metrics You Get
Without CallMeter
Hours of manual trace correlation per incident
With CallMeter
Root cause identified in under 60 seconds